溧水洁鹏 鞍硕
 
解决方案-自动化专机设备
轮胎硫化输送线

商品名称:思科亚轮胎硫化输送线

型  号:SK-ZJ-L800
机架材质:碳钢
电机功率:2200W,速比:25:1,变频调速
输送介质:输送滚筒

·思科亚专机系列
·结构筒单,价格合理,输送平稳,噪声低的特点。
·机械、化工、非标定制设备,钣金焊接件,激光加工件
   
功能特点:  
The tire of the vulcanizer is conveyed by the unpowered roller conveyor of the vulcanizer and directly falls on the trench line (horizontal roller conveyor), under which there is a tire stopper, and each tire dropping opening is equipped with a detection switch to prevent the tire stacking and stacking together. The end of the trench line of the vulcanizer is a climbing belt conveyor, and the climbing belt conveyor climbs to a height of 1 m above the ground, with 90 ° unpowered rear end butt joint. After the roller turning machine, it climbs to the top of the steel platform at the belt conveyor connecting the climbing, enters the buffer area and circulates through the combined turnover machine. The tire enters the input device through the turnover machine and then enters the rubber wool trimmer from the horizontal to the vertical; the tire carries out the manual rubber wool trimming on the rubber wool trimmer. After the rubber wool trimming is completed, the tire turns out the roller conveyor from the vertical to the belt conveyor. Then the belt conveyor and 90 ° turning conveyor enter the appearance inspection circulating conveyor line; on the appearance inspection conveyor line, conduct the appearance inspection manually (manually pull out the tire and place it on the universal ball platform for appearance inspection), manually put the unqualified tire into the lower layer of f-f line and transport it to the rework area, and manually transfer the unqualified tire measured by white tire into the lower layer of E-E line to the rework area. Domain, put the qualified tires on the upper layer of f-f line and circulate on the f-f and G-G circulation lines; manually load the tires into the car and put them into the car; manually push the tires into the car to the conveyor line before the automatic input device and position them; the tires on the tires into the car are put into the dynamic balance uniformity machine and put into the conveyor line for automatic detection; after the detection, the dynamic balance is even. There is a lifting conveyor at the outlet of the homogenizer. Through the layered function of the lifting conveyor, the class A and class B products of the tires are respectively transported to the conveyor line of the tire receiving and cage loading area, and finally to the tire receiving and cage loading area, and the unqualified products are directly offline; the qualified products are loaded into the cage and transported to the warehouse by forklift.
硫化机出胎通过硫化机出胎无动力辊筒输送机输送直接落在地沟线上(横向辊面输送机),下方装有挡胎器,每一个落胎口都装有检测开关,防止轮胎堆落叠加在一起,硫化机地沟线末端是爬坡皮带输送机,爬坡皮带输送机爬到地面1米高位置,后端对接90°无动力滚筒转弯机,后在接爬坡皮带输送机爬坡到钢平台上方,进入到缓存区域通过合流翻板机循环,轮胎通过翻板机在进入投入装置由平放转为立式进入胶毛修剪机;轮胎在胶毛修剪机上进行人工修剪胶毛,修剪胶毛完成后,轮胎在立式转出辊道由立式转入皮带输送机,再经胶带输送机、90°转弯输送机进入外观检查循环输送线;在外观检查输送线上人工进行外观检查(人工将轮胎拉出放置在外观检测万向球平台上),人工将不合格轮胎放入F-F线下层输送到返修区域, 人工将不合格轮胎需要白胎测得放入E-E线下层输送到返修集中区域,将合格轮胎放入F-F线上层,在F-F、G-G循环线上循环;人工将轮胎装入轮胎投入小车;由人工将轮胎投入小车推到自动投入装置前的输送线处并定位,轮胎投入小车上的轮胎被自动投入装置投入到动平衡均匀性机投入输送线上进行自动检测,检测完成后,动平衡均匀性机出口处设有升降输送机,经过升降输送机的分层作用,将轮胎的A级品、B级品分别输送至收胎装笼区输送线上,最终输送到收胎装笼区,将不合格产品直接下线;合格产品装入笼内,使用叉车运输到库房。
地址:安徽省马鞍山雨山经济开发区智能装备产业园 电话:400-637-5237 手机:15555350699 Copyright © 2013 - 2020 洁鹏企业 版权所有 苏ICP备11049437号-1